HIW-66-S Single Cylinder Ironworker
Hellerson
Specifications:
Motor power……………………………..5.5HP
Net weight………………………………..2,860 lbs
Gross weight…………………………… 3,100 lbs
Packing dimension…………………….. 65” x 31” x 75”
Punching:
Rated capacity……………………………………..66 Tons
Maximum capacity………………………………...1” thru ¾”
Diameter x thickness………………………………1-7/16” thru 9/16”
Stroke length………………………………………..2-1/8”
Speed at 5/8” travel……………………………..26 strokes/min.
Throat depth………………………………………...8.6”
Work height………………………………………… 37”
Plate Shearing:
Flat bar maximum thickness…………………… 9/16”
Flat bar maximum width………………………….12”
Blade length……………………………………….12-3/16”
Angle Cutting:
90° cut ………………………………………………4 x 4 x1/2”
45° mitre cut…………………………………………3 x 3x 5/16”
Work height………………………………………….45”
Section Cutting:
Round / Square ………………………………………1-9/16” / 1-3/8”
Channel / beam………………………………………. 4” – 4.1 Lbs/Ft.
Tee………………………………………………………3 x 3 x 3/8”
Rectangular Coping:
Thickness ……………………………………………..3/8”
Width - rectangle………………………………………. 1-21/32”
Depth - rectangle……………………………………… 3.94”
Depth – vee……………………………………………….2-3/8”
Angle flange-max. profile………………………………..4 x 4 x 3/8”
Work height…………………………………………..……37”
Corner notching:
Maximum capacity………………………………………6” x ¼”
Bending at coper/notcher station:
Maximum capacity……………………………………6” x ½”
Punching at coper/notcher station:
Throat depth …………………………………….……4.33”
Maximum capacity……………………………………3/4” thru ½”

Note:    All capacities are based on 65,000 PSI Tensile

Standard Features

  • Structural saddle for punching flat bar, angle iron and the flange of channel and / or beam.
  • Maximum punch diameter in standard execution: 1-7/16”
  • Oversize punching attachment available as an option. Heavy-duty support tables are standard for the punching, notching and shearing station.
  • Adjustable stroke control with inching
  • The Unique ‘Z’ – aperture enables the true shearing of angle iron varying from 45° up to 90°on both legs. Larger angles can be mitered in the plate shear work station.
  • Rectangular coper whose station can be transformed into a secondary punch station at an optional cost.
  • Extended safety features as standard equipment to meet ANSI Bll.5
  • Centralized pressure lubrication
  • Machines with low maintenance requirements
Standard Equipment
  • Punch adaptors
  • Swing away punch stripper unit
  • Easy change punch holder
  • Universal die saddle
  • Heavy-duty support tables with guides at shear station and punch station.
  • Heavy-duty support table with guides at coping station
  • Upper and lower shear blades with 4 cutting edges
  • 39” electric back gauge
  • Service toolkit
  • Work station guards
  • Instruction, operating and maintenance manual