 |
Heller 3 Roll Hydraulic Single Initial Pinch Plate Bending Machines Compact, Rugged European Design Single initial pinch machine allows for pre-bending the leading edge of sheet to be rolled. Trailing edge is bent in same method after plate has been turned around. |
Plate Bending Roll Specifications
| Model | Capacity | Roll Diameter MM | Roll Diameter Inches |
| H345 | 41" x 7 ga | 120mm | 4.72" |
| H440 | 51" x 10 ga | 120mm | 4.72" |
| H465 | 51" x 1/4" | 150mm | 5.90" |
| H480 | 51" x 5/16" | 180mm | 7.09" |
| H535 | 61" x 10 ga | 120mm | 4.72" |
| H545 | 61" x 7 ga | 150mm | 5.90" |
| H570 | 61" x 1/4" | 180mm | 7.09" |
| H625 | 80" x 12 ga | 120mm | 4.72" |
| H640 | 80" x 10 ga | 150mm | 5.90" |
| H650 | 80" x 3/16" | 180mm | 7.09" |
| H830 | 100" x 11 ga | 150mm | 5.90" |
| H845 | 100" x 7 ga | 180mm | 7.09" |
| H1020 | 120" x 14 ga | 150mm | 5.90" |
| H1035 | 120" x 10 ga | 180mm | 7.09" |
Standard Features
- Three drive rolls
- Powered forming roll
- Manual pinching roll
- Hardened Rolls HRC 55
- Electric foot switches for drive rolls
- Emergency stop
- Self braking motor
- LED readout
Technical Specs
- Three drive rolls
- Powered forming roll
Web Site Design by: San Antonio Computer Doctor Promotion by: WSI
Web Site Design by: San Antonio Computer Doctor Promotion by: WSI