Hellerson  

Heller PBM50 Angle Roll

The Heller PBM 50 is very well suited for small to medium production runs of pipes, tubes, angles and flats. This affordable angle roll is ideal for bending medium wall thicknesses and is a "must have" in all ornamental and job shops.

Each PBM50 comes standard with a standard steel base, emergency stop technology and foot pedals for left and right rotation.  The PMB50 also allows for optional pipe or tube bending rolls as well as an optional spiral bending attachment

 

Capacity

Material PBM 35
   

Flats, Hard Way    Heller PBM50 Angle Roll Bending Machines

2-1/2 x 3/8  Ø 32"
2 x 1/2  Ø 32"

Flats, Easy Way   

3 x 3/4 Ø 30"

Square Bar  

1-3/8 Ø 48"
3/4 Ø 16"

Angle, Leg-out   

2 x 2 x 1/4 Ø 40"

Angle, Leg-in   

2 x 2 x 1/4 Ø 48"

Tee, Leg-out   

2 x 2 x 3/16 Ø 30"

Tee, Leg-in  

2 x2 x 3/16 Ø 48" 

Channel, Leg-out  

2-3/8 x 1-3/16 x 1/4 Ø 24"

Channel, Leg-in  

2-3/8 x 1-3/16 x 1/4 Ø 28"

Round Bar   

1-3/8 Ø 32"

Pipe, Sch. 40  

2” Ø 48"

Round Tube   

2-3/4 x .120 Ø 48"

Square Tube   

2 x .120 Ø 40"

Rect. Tube Hard Way   

2 x 1-1/2 x .120 Ø 48”  

Standard Features

  1. Spheroid Cast Iron
  2. Oversized 2” Shafts for Less Deflection
  3. Hardened Rolls
  4. Hardened Precision
  5. Threaded Shafts
  6. Horizontal and Vertical Working Positions
  7. Dual Adjustable Lateral Guides
  8. Low Voltage Controls
  9. Emergency Stop
  10. Foot Pedal for Left and Right Rotation
  11. Standard Steel Base
  12. Universal Tooling for Flats, T’s
  13. Universal Tooling for Channel & Square Bar


Technical Specs

Shaft Diameters: 1.97" (50mm)
Roll Diameters:  6.10” (155mm) 
Shaft Speeds: 142 IPM
Working Positions:  2 (Vertical and Horizontal) 
Weight: 950 Lbs.
Dimensions: 32" x 28" x 48" 
Drive Motor:  2HP, 220/440 v/ 60 Hz / 3ph

Optional Accessories

  1. Pipe/Tube Bending Rolls (Steel or Polymer)
  2. Spiral Bending Attachment
  3. Molding Cap Rail
  4. Angle Leg In
Special applications upon request

Additional tooling may be required to attain some capacities. Capacities are calculated based on A36 steel with a yield rating of 36,000 PSI.


More Angle Roll Machines

Web Site Design by: San Antonio Computer Doctor    Promotion by: WSI