|
       
|
|
Heller PBM 35 Angle Roll
Standard Features
- Spheroid Cast Iron Frame
-
Oversized 2” Shafts for Less Deflection
- Hardened Rolls
- Hardened Precision Threaded Shafts
- Horizontal and Vertical Working Positions
- Dual
Adjustable Lateral Guides
- Low
Voltage Controls
- Emergency Stop
- Foot
Pedal for Left and Right Rotation
- Standard Steel Base
- Universal Tooling for Flats, T’s, Channel and Square Bar
|
Technical Specifications
| Shaft Diameters: |
1.97” (50mm) |
| Roll Diameters: |
6.10” (155mm) |
| Drive Motor: |
2HP, 220/440
volt/ 60 Hz / 3ph |
| Shaft Speeds: |
142 IPM |
| Working Positions: |
2 (Vertical and Horizontal) |
| Weight: |
950 Lbs. |
| Dimensions: |
32" x 28" x
48" |
Capacity
|
Material |
PBM 35 |
|
Flats, Hard Way
 |
2-1/2 x 3/8 Ø 32"
2 x 1/2 Ø 32" |
|
Flats, Easy Way  |
3
x 3/4 Ø 30" |
|
Square Bar
 |
1-3/8 Ø 48"
3/4 Ø 16" |
|
Angle, Leg-out  |
2 x 2 x 1/4 Ø 40" |
|
Angle, Leg-in  |
2 x 2 x 1/4 Ø 48" |
|
Tee, Leg-out  |
2 x 2 x 3/16 Ø 30" |
|
Tee, Leg-in
 |
2 x2 x 3/16 Ø 48" |
|
Channel, Leg-out
 |
2-3/8 x 1-3/16 x 1/4 Ø 24" |
|
Channel, Leg-in
 |
2-3/8 x 1-3/16 x 1/4 Ø 28" |
|
Round Bar  |
1-3/8 Ø 32" |
|
Pipe, Sch. 40
 |
2” Ø 48" |
|
Round Tube  |
2-3/4 x .120 Ø 48" |
|
Square Tube  |
2 x .120 Ø 40" |
|
Rect. Tube Hard Way  |
2 x 1-1/2 x .120
Ø 48” |
-
OPTIONAL ACCESSORIES
-
PIPE/TUBE BENDING ROLLS (Steel or Polymer)
- SPIRAL
BENDING ATTACHMENT
- MOLDED
CAP RAIL
- ANGLE
LEG IN
|
Special applications upon request
* Additional tooling may be required to attain some capacities.
Capacities are calculated based on A36 steel with a yield rating of
36,000 PSI.
|
|
