 |
Heller PBH 60 Angle Roll The Heller PBH 60 Angle Roll bending machine is a versatile, economical yet powerful universal profile bender with hydraulic forming. It is easy to operate and is well suited for bending pipe, tube, aluminum extrusions and other sections. This model will save you set up time. Standard features include double pinch hydraulic forming rolls, hardened precision threadedx shafts, and dual adjustable lateral guides. |
Capacity
| Material | PBH 60 |
Flats, Hard Way |
2-3/4 x 3/8 Ø 24" and 1-3/16 x 3/8 X 14” |
Flats, Easy Way |
3-1/2 x 1 Ø 20" |
Square Bar |
1-1/2 Ø 20" |
Angle, Leg-out |
2-1/2 x 2-1/2 x 1/4 Ø 24" |
Angle, Leg-in |
2-1/2 x 2-1/2 x 1/4 Ø 28" |
Tee, Leg-out |
2 x 2 x 3/16 Ø 24" |
Tee, Leg-in |
2 x 2 x 3/16 Ø 28" |
Channel, Leg-out |
3" Ø 24" |
Channel, Leg-in |
3" Ø 28" |
Round Bar |
1-3/8 Ø 20" |
Pipe, Sch. 40 |
2 Ø 24" |
Round Tube |
2-3/4 x .075 Ø 24" |
Square Tube |
2 x .120 Ø 40" |
Rect. Tube Hard Way |
2-1/2 x 1-3/16 x .120 Ø 40” |
Standard Features
- Double Pinch Hydraulic Forming Rolls with LED Readouts
- Hardened Rolls
- Hardened Precision Threaded Shafts
- Horizontal and Vertical Working Positions
- Dual Adjustable Lateral Guides
- Low Voltage Controls
- Emergency Stop
- Foot Pedal for Left and Right Rotation
- Standard Steel Base
- Universal Tooling for Flats, T’s, Channel and Square Bar
Technical Specs
-
Shaft Diameters: 2.36” (60mm) Roll Diameters: 6.97” (177mm) Drive Motor: 3HP, 220/440 volt/ 60 Hz / 3ph Shaft Speeds: 197 IPM Working Positions: 2 (Vertical and Horizontal) Weight: 2627 Lbs. Dimensions: 46" x 40" x 47"
Optional Accessories
- Pipe/Tube Bending Rolls (Steel or Polymer)
- Spiral Bending Attachment
- Molding Cap Rail
- Angle Leg In
Special applications upon request
Additional tooling may be required to attain some capacities. Capacities are calculated based on A36 steel with a yield rating of 36,000 PSI.
More Angle Roll Machines
Web Site Design by: San Antonio Computer Doctor Promotion by: WSI